WS-2310 FAQs
Buy Now!Corporate SalesFeatured ProductsGive AwayInternational SalesSite MapWar on Spam


 

WS-2310TWC Main Unit 
WS-2310 Main Unit 
WS-2310 FAQs 
HomeFeatured ProductsWeather StationsLa Crosse WeatherWS-2310TWCWS-2310 FAQs

 

La Crosse Technology

    WS-2310
FAQs

Frequently Asked Questions:
 

Q: How does the wired/wireless part of this weather station work?
A: This particular weather station has an optional wireless feature. You can either have your wind, rain, and thermo-hygro sensor wired together and have them transmit wireless to the base station or have them wired to the base station with the phone cable.

Q: Can I use additional sensors with this system?
A: No. The WS-2310 Weather Station is a closed system. It will not accept additional sensors.

Q: What is the maximum range of the weather station?
A: In wireless mode, the maximum range is about 80 feet. In wired mode, the maximum range is about 150 feet.

Q: Can I cut or shorten the wires that connect the sensors?
A: We do not recommend that, as it voids the warranty.

Q: How do I secure the rain gauge?
A: On the bottom of the sensor there are 4 holes. You can use those holes to screw the gauge into something. First remove the cover. You have to push in the tabs on the sides and then pull the cover off. There will be a teeter-totter that has a metal bar for an axis. Pull the metal bar out with a pair of pliers. The teeter-totter can then be removed giving you access to the screw holes. Make sure that you do not screw them in too tightly as that will cause the teeter-totter to malfunction. Then you can reinstall the teeter-totter making sure that it is replaced in exactly the reverse order from the way that it was taken out. Then replace the cover.

Q: How do I reset total rainfall?
A: Follow the steps below -

  1. Press the Min/Max button to get into that mode.
  2. Press the display button until just the Total Rain and the Time and Date are displayed.
  3. Then press the - button until it resets to zero.
  4. Do not press any buttons until it returns to the regular display.

To Buy, Go UP

PreviousUp

Copyright 1999 - 2020 by Future-Digital International. All Rights Reserved.
sales at future-digital.com


to the screw holes. Make sure that you do not screw them in too tight because that will cause your teeter-to malfunction. Then you can reinstall the teeter-totter making sure that it is put in the exactly the same way that it was taken out. Then put the cover back on.

 

 

 

Section 3 - Reset total rainfall

 

 

 

Reason

 

Clear rainfall data

 

 

 

 

 

  1. Press the MIN/MAX button to get into that mode.
  2. Press the display button until just the TOTAL Rain and the TIME and Date are displayed.
  3. Then press the - button until it resets to zero.
  4. DO NOT press any buttons until it returns to the regular display.

Note: The procedure above should solve the majority of your problems with your weather station. If you continue to have problems, please contact our support line at 1-888-211-1923 or support@lacrossetechnology.comfor more information.

To Buy, Go UP

PreviousUp

Buy Now!Corporate SalesFeatured ProductsGive AwayInternational SalesSite MapWar on Spam

Copyright 1999 - 2020 by Future-Digital International. All Rights Reserved.
sales at future-digital.com